⚠️ 3 verified solutions available for Error 57 — Last updated 2026-02-27
Error 57 📋

How to Fix ERROR_ADAP_HDW_ERR (Error 57)

Error 57, or ERROR_ADAP_HDW_ERR, occurs when a network adapter hardware issue is detected, causing network connectivity problems. This error can be frustrating, but it's often resolvable with some troubleshooting. It typically indicates a hardware failure or configuration issue with the network adapter.

🏷️ Code: 57 📛 ERROR_ADAP_HDW_ERR 📅 Updated: 2026-02-27 ⏱️ 3 Solutions
🐞 Auto-Fix Script for Error 57
⚠️ How to use: Open PowerShell as Administrator, paste the code above, and press Enter.
✓ Safe & Transparent ✓ No Downloads Required ✓ Review Before Running
📑 Table of Contents
What is Error 57? Common Causes Step-by-Step Solutions Prevention Tips Related Errors

💡 What is Error 57?

Resolving Error 57 requires a systematic approach to troubleshooting. The first step is to identify the cause of the error, which can involve checking the network adapter's hardware, updating drivers, and verifying network settings. In some cases, the error may be resolved by simply restarting the computer or disabling and re-enabling the network adapter. However, if the error persists, more advanced troubleshooting may be necessary, such as running diagnostic tests or replacing the network adapter.

⚠️ Common Causes

  • Faulty or damaged network adapter
  • Outdated or corrupted network drivers
  • Incorrect network settings or configuration
📚 Comprehensive Guide

Understanding HRESULT Codes: A Deep Dive into Windows Error Architecture

A deep technical dive into decoding 32-bit HRESULT error codes in Windows, understanding facility codes, and identifying error sources.

Read the full guide →

✅ Step-by-Step Solutions

1 Restart and Disable/Enable Network Adapter
  1. Restart the computer
  2. Disable the network adapter in Device Manager
  3. Enable the network adapter again
Advertisement
[AdSense In-Article Ad Generator]
Show Advanced Solutions (2 more)
2 Update Network Drivers
  1. Open Device Manager
  2. Locate the network adapter
  3. Update the driver to the latest version
3 Run Network Troubleshooter
  1. Open Settings
  2. Go to Update & Security
  3. Run the Network Troubleshooter

🎬 Video Tutorials

▶️ Watch Video Tutorials
How to fix Error 57 (Adap Hdw Err)
Open on YouTube →

🛡️ Prevention Tips

  • Regularly update network drivers
  • Use a high-quality network adapter
  • Configure network settings correctly
Was this helpful?
Last updated: 2026-02-27
📖
Based on Official Microsoft Documentation
Solutions Tested on Windows 10 & 11
Error codes sourced from Microsoft Win32 SDK. Updated 2026-02-27.
🔧 Diagnose Your Error